• Update: 14 03 20

    Impact of angular contact ball bearings on use

    The shaft parts of the machine tool, especially the main shaft, are generally assembled into a thrust ball bearing and rotate at a high speed, sometimes generating high heat. If this phenomenon is not ruled out in time, it will cause angular contact ball bearings to overheat and increase the temperature of the corresponding parts of the machine tool, resulting in thermal deformation. In severe cases, the spindle and ...

    More details
  • Update: 06 03 20

    Advantages of hybrid ceramic bearings

    Hybrid ceramic bearings may be less common, and the main configuration of hybrid ceramic bearings is a combination of inner and outer ring bearing steel / stainless steel + ceramic ball + PA66 / stainless steel retainer + 2RS / ZZ. Hybrid ceramic bearings have the following four advantages during use.(1), high temperature resistance, small thermal expansion coefficient of ceramic balls, under high temperature enviro...

    More details
  • Update: 28 02 20

    How is the bearing maintained

    Bearings play an important role in industrial equipment. Often the quality of the bearing also determines the operating efficiency of the entire equipment. In order for the bearing to fully perform its proper performance, it should be regularly maintained and maintained. Appropriate inspection can find faults in time, prevent problems before they occur, and improve the efficiency of the entire equipment.1. Cleaning. ...

    More details
  • Update: 22 02 20

    Analysis of noise characteristics of imported bearings

    The high-quality 6203 imported bearing raceway sound is 25-27dB. This type of noise is most typical of single-row deep groove ball imported bearings that support radial loads. It has the following characteristics: 1. When the radial clearance increases, the sound pressure level increases sharply; 2. The vibration frequency is above 1kHz; 3. The higher the viscosity of the lubricant, the lower the sound pressure leve...

    More details
  • Update: 16 02 20

    Steps for installing bearings by heating

    Installing the bearing for heating is a method. This heating method can reduce bearing wear and improve installation efficiency.The principle of the heating method is to use thermal expansion to heat the bearing inner ring, and the NSK bearing can be installed when it reaches a safe expansion temperature. The main steps are as follows: 1. Bearing cleaning, put the bearing in a gasoline-filled cleaning box, wear rubbe...

    More details
  • Update: 11 02 20

    Do you know thrust tapered roller bearings

    What is a thrust cylindrical roller bearing? This is a combination often used in high-rigidity bearing arrangements and can withstand heavy and vibration loads without difficulty. Because the rolling body in thrust tapered roller bearings is a tapered roller, and its structure and rolling generatrix and the raceway generatrix of the washer meet at a certain point on the bearing's axis line, the rolling surface can fo...

    More details