Industry News

  • Update: 28 08 20

    Difference between self lubricating bearing and oil bearing

    The bearing is used to support the components, but also used to support the rotating parts on the shaft. According to the conflict nature, the types of self-lubricating sliding plate bearing are divided into sliding bearing and rolling bearing; according to the direction of bearing load, there are centripetal bearing, propulsion bearing, centripetal thrust bearing, etc. 1、 Oil bearingThe sintered body made by powder ...

    More details
  • Update: 22 08 20

    The difference between oil-free bearings, self-lubricating bearings and composite bearings

    Oil-free bearing is a novel lubricating bearing that combines the characteristics of metal bearing and oil-free lubrication bearing. The metal matrix bears the load, and the specially formulated solid lubricating material plays the role of lubrication. It has the characteristics of high bearing capacity, impact resistance, high temperature resistance, and strong self-lubricating ability. It is especially suitable for...

    More details
  • Update: 14 08 20

    Introduction of bearing ring processing technology

    Although there are many types of rolling bearings, their structural types, tolerance levels, material selection, and processing methods are different, but their basic manufacturing processes are similar. The following briefly introduces the processing technology of bearing parts: Bearing manufacturing generally goes through the following processes: 1 Bearing parts manufacturing 2 Inspection of bearing parts 3 Demagne...

    More details
  • Update: 08 08 20

    Selection of oil-free self-lubricating bearings

    In order to solve the lubrication problems of high temperature, low speed, heavy load, dust, water flushing and impact vibration in mechanical equipment, oil-free self-lubricating bearing is selected.1. The structure of the bearing self-lubricating bearing is to develop holes with proper size and orderly arrangement on the metal friction surface of the bearing matrix, and embed molybdenum disulfide, graphite, etc. to...

    More details
  • Update: 31 07 20

    Distinguishing self lubricating bearing from oil bearing

    What is an oil bearing?The sintered body made by powder metallurgy with metal powder as the main raw material for oil bearing is porous in nature and has the technical advantages of freely adjusting the number, size, shape and distribution of pores in the manufacturing process. Using the porosity of the sintered body, it is impregnated with 10% - 40% (volume fraction) lubricating oil and used in the state of self sup...

    More details
  • Update: 29 07 20

    Share the precautions during the manufacturing process of the copper sleeve process

    Everyone knows that the copper sleeve has low hardness and poor wear resistance, and it is not difficult to cause seizure, so it also has good casting performance and machinability. It has weak corrosion resistance. Then it is very careful in the manufacturing process of the craft, so what should we pay attention to in the manufacturing process of the craft?The first point: When casting copper sleeves, all processes ...

    More details

LOOKING FOR PROFESSIONALS &
RELIABLE MANUFACTURER OF SLIDING BEARINGS?