• Update: 15 11 19

    How should the bearings be cleaned

    The bearing is a small part of the mechanical operation, which seems to be small, but it has a great effect. The loss of bearings in mechanical use is also very large, so daily attention should be paid to cleaning work.There are many ways to clean the bearings. Here are a few of them. The first is the easiest cleaning with detergent. Firstly, the surface of the bearing is cleaned. When cleaning the surface, the appro...

    More details
  • Update: 09 11 19

    What are the methods of using the bearings

    The bearing occupies a very important position in the operation of the machine. Without the bearing, the machine can hardly operate. As a kind of fine part, the bearing should pay special attention to the use. If it is used improperly, it can not only achieve the expected effect, but also easily damage the bearing.First, pay attention to the cleaning of the bearings and the surrounding environment, and always clean t...

    More details
  • Update: 01 11 19

    How to choose the lubricant of the bearing

    The operation of the bearing relies heavily on the lubricant, and the quality of the oil is critical to the operating efficiency of the bearing. Therefore, the choice of bearings should follow the following principles:1. Movement speed. The higher the running speed of the bearing, the easier it is to form the oil wedge. In order to ensure the oil film, a low viscosity lubricating oil can be used. If the viscosity cho...

    More details
  • Update: 26 10 19

    How to fit the bearing

    The operation of mechanical equipment is inseparable from the bearing. The proper installation of the bearing is conducive to the operation speed and efficiency of the equipment. It is also the protection of the mechanical equipment. The bearing installation food is prone to failure and brings safety hazards.First, cleaningBefore installing the bearing, first clean the bearing with gasoline or kerosene, and wait for ...

    More details
  • Update: 20 03 19

    The difference between oil bearing and self-lubricating bearing

    The oil-impregnated bearing is made of metal powder as the main raw material, and the sintered body produced by the powder metallurgy method is inherently porous, and has technical advantages such as the number, size, shape and distribution of the pores which can be freely adjusted during the manufacturing process. The porous body of the sintered body is impregnated with 10% to 40% by volume of the lubricating oil, a...

    More details
  • Update: 20 03 19

    Oil-free lubrication bearing series features

    1. No oil lubrication or less oil lubrication. It is suitable for places that cannot be refueled or difficult to refuel. It can be used without maintenance or less maintenance. 2. Good wear resistance, small friction coefficient and long service life. 3. There is an appropriate amount of elastoplasticity, which can distribute the stress on the wider contact surface and improve the bearing capacity of the bearing. 4. ...

    More details